Dedicated Technology's Custom Guns Page:
WSSM UPPERS .223 AR-15 PRICING ALTERNATE CALIBERS CONTACT
*NEW*
I am now offering a brand new wildcat based off of the 6.8 SPC. I am calling it the 6mm DTI (Dtech Improved) It has a sharper shoulder that is moved forward, with added case capacity, but plenty of room for varmint, predator and hunting bullets. I just finished my first two uppers in the fall of 09'. I took a nice white-tail buck with mine last fall. With very little time for load-development, I was shooting an 85 grain Nosler partition at about 3000 FPS. This should nicely fill the void between the 6 X 45 and the .243 WSSM.
*NEW*
I am now offering a line of wildcat chamberings based off of the WSSM line! I have dies, reamers and barrel-blanks in stock for: 7mm WSSM, .300 WSSM, .338 WSSM and .358 WSSM. The .358 version will be trimmed enough to qualify for being Indiana big-game legal!
UPDATE!
I have just received the dies from Hornady! I chambered a Shilen blank in .358 and fire-formed some cases. I have shot some 200 grain Sierra bullets, seated to the cannelure, and am getting velocities that are exceeding the .358 Winchesters max. loads. Even by exceeding the .358 Winchester by over 100 FPS, I am still getting on signs of high pressure. I will keep you posted as to how this project progresses.
Integral Compensator
These compensators are made of 416F stainless steel (the same material used in the barrels). The port size is determined by the twist rate of the barrel or the typical bullet weight used by the customer. Total compensation is achieved with negligible increase in noise level.
Here the barrel is threaded and ready for the compensator "cup"
Porting the comp.
Here you can see the amount of length added to the barrel.
Custom Fluting
Fluting is all done under a flood coolant. When the fluting is completed, the barrel is cool to the touch. This is not "cosmetic" fluting. This fluting takes between 1/4 to 1/3 of the barrel weight away. A 24", .243 WSSM barrel that weighs 4.44 pounds un-fluted weighs 3.28 pounds after the fluting is complete.
We will be adding some information soon on Mikes custom guns!!
Check back soon!!
(218) 444-7419
HOME STOREFRONT WSSM UPPERS .223 AR-15 PRICING ALTERNATE CALIBERS